Network Configuration - SpectraLink NetLink MOG600 Installation Manual

SpectraLink Corporation
5.2

Network Configuration

From the
NetLink OAI System
to the following displays:
*
* Allow FTP Connections option appears on MOG 7xx model only
Enter configuration information for the NetLink OAI Gateway. Your LAN administrator
should provide this information.
•
Ethernet Address
factory and not user configurable.
•
IP Address
as needed. The IP address of the NetLink OAI Gateway, defined by your
network administrator. Enter the complete address including digits and
periods. DHCP should not be used with IP OAI.
•
Hostname
gateway to which you are connected, for identification purposes only. You
cannot enter spaces in this field.
•
Subnet Mask
•
Default Router
Part Number: 72-0078-07-A.doc
menu, select
– this is the MAC address of the gateway, set at the
– Established in the initial serial connection and may be changed
– change the default host name, if desired. This is the name of the
– enter the subnet mask defined by the Network Administrator.
– DHCP or static IP address
Network Configuration
Installation
NetLink OAI Gateway
. A screen similar
Page 21