Telephone Line Configuration - SpectraLink NetLink MOG600 Installation Manual

SpectraLink Corporation
5.4

Telephone Line Configuration

In an IP system, each Wireless Telephone that is to use OAI features must be configured
with its line number and MAC address. Optionally the name and extension number of the
Wireless Telephone user may be entered.
The system will not allow you to register the same Wireless Telephone to two different
lines. Use Esc to cancel out of any unwanted transaction.
1. Use the arrow keys to navigate to the name and extension fields and enter the
associated data.
•
MAC Address
battery on the Wireless Telephone. It can also be displayed on the Wireless
Telephone by turning off the Wireless Telephone, and then pressing and
holding the
the display (12 characters).
The MAC address must be manually entered by typing the entire address
including digits and colons.
•
- enter the user name assigned to the telephone. This is for record
Name
keeping only; it does not communicate the name to the PBX or the Wireless
Telephone.
•
Extension
keeping only; it does not communicate the extension to the PBX or the
Wireless Telephone.
Part Number: 72-0078-07-A.doc
- the MAC address is printed on the sticker underneath the
(power) button. The MAC address appears on the first line of
Pwr
- enter the extension assigned to this telephone. This is for record
Installation
NetLink OAI Gateway
Page 24