Connect To The Module - ICP DAS USA I-7565M-HS User Manual

4.3.1 Connect to the module

When executing the Utility, the tool will try to scan all the necessary I-7565M-HS
modules and list all scanned module information on "Module Name" location of the
Utility "Connect" frame. User can re-connect to re-scan the newer inserted I-7565M-HS
module.
Figure 4-3 "Connect to ..." screen of the I-7565-HS Utility
Before connect to the module, user can set the CAN port operation mode and CAN
baudrate parameter of the module. Please refer to the following steps to configure the
I-7565M-HS device.
Step1: Click the "Connect to ..." item to open the "Connect" frame of Utility.
Step2: Select the necessary I-7565M-HS module.
I-7565M-HS USB to CAN converter User Manual (version 1.0.0) Page: 22
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com