4.3. Start to use I-7565-HS Utility tool
A Menu tool bar.
[File]
Load/Save configuration of the "Send frame" and save received messages on
"Receive frame".
[Connect]
Connect/Disconnect with the module.
[Configuration]
Open the "Module Configuration" frame to set the CAN ID filter and configure the
module parameters.
[Help]
About Utility tool information.
I-7565M-HS USB to CAN converter User Manual (version 1.0.0)
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Figure 4-2 Main frame of the I-7565-HS Utility tool
Page: 20