Led Indicator - ICP DAS USA I-7565M-HS User Manual

2.4.

LED Indicator

There are 6 LEDs on the I-7565M-HS. One for power indication, one for hardware
status indication and four for CAN Bus indication. The LED assignment and
description are shown as follows.
LED Name Color
Power Red
MS Red
CAN1_ST Red
CAN2_ST Red
CAN1 Green
CAN2 Green
NOTE:
In "Firmware Upgrade Mode":
These LEDs of "Power", "MS", "CAN1_ST", "CAN2_ST", "CAN2", "CAN1" would flash in
the clockwise direction.
I-7565M-HS USB to CAN converter User Manual (version 1.0.0)
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Figure 2-3 LED Assignment of I-7565M-HS
Table 2-2 LED Description
Description
Power status of USB port
Module status.
OFF: no error
ON: hardware malfunction
CAN Bus status.
OFF: no error
ON: CAN1 Bus Off
Flash: CAN1 Bus error or data overrun
CAN Bus status.
OFF: no error
ON: CAN2 Bus Off
Flash: CAN2 Bus error or data overrun
OFF: no messages on CAN1 port
Flash: Transmit/Receive messages on CAN1 port
OFF: no messages on CAN2 port
Flash: Transmit/Receive messages on CAN2 port
Page: 11