Step 7: Press the "Firmware Update" button to update the firmware. After successfully
to upgrade the firmware, the "Firmware Update Success! Please Reboot
Module!" information will be display on the "3. Firmware Update" frame.
Step 8: Set the 'Init' dip switch of the module to the 'OFF' position.
Step 9: Replug the USB cable to reboot the module and press the "Exit" button to exit
the "Firmware Update Tool"
I-7565M-HS USB to CAN converter User Manual (version 1.0.0)
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Page: 81