ICP DAS USA I-7565M-HS User Manual page 25

[Send Message] block:
<1> "Send Message Configuration" frame :
It is used to edit the CAN message parameters and users can use "Add" button
to add the CAN message to "CAN Message Send Area".
<2> "Add" button :
It will add the CAN message from "Send Message Configuration" area to the
last row in "CAN Message Send Area".
<3> "Modify" button :
It will modify the CAN message parameter from "Send Message Configuration"
area to the assigned blue row in "CAN Message Send Area".
<4> "Delete" button :
It will delete the CAN message of the assigned blue row in "CAN Message Send
Area".
<5> "Del Table" button :
It will delete all the CAN messages in "CAN Message Send Area".
<6> "Send" button :
It will send the CAN message of the assigned green row in "CAN Message
Send Area". If the value in the "Timer" field is zero, it will just send once. If not, it
will send continuously by PC timer.
<7> "HWSend" button :
It will send the CAN message of the assigned blue row in "CAN Message Send
Area". If the value in the "Timer" field is zero, it will just send once. If not, it will
send continuously by module hardware timer and it will be more precise than
PC timer. If users want to send the CAN message with fixed number, then
before clicking "HWSend" button, please check the "HWSendCnt" checkbox first
and input the count in this field.
<8> "Clr Cnt" button :
It will clear the "SendCnt" value to be zero in "CAN Message Send Area".
<9> "SendCnt" field :
Whenever the CAN message is sent out once, the "SendCnt" value will be
added by 1 except "HWSend" function.
I-7565M-HS USB to CAN converter User Manual (version 1.0.0)
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Page: 25