Rinse Arms - Champion 64 PRO Operation, Cleaning, And Maintenance Manual

RINSE ARMS —
1
ROTATE RINSE ARM 1/4 TURN AND PULL TO REMOVE (FIG. 35).
USE SCREWDRIVER TO REMOVE END PLUG AND FLUSH ARM WITH
2
CLEAN WATER. INSPECT O-RING FOR DAMAGE AND REPLACE IF
NEEDED (FIG. 36).
3
CLEAN THE SPRAY NOZZLES WITH A PAPER CLIP (FIG. 37).
Fig. 36
The upper and lower rinse arm nozzles should be cleaned regularly
to prevent scale build-up.
Fig. 35
Cleaning
Fig. 37
25