Servo Menu; Basic Menu - RadioLink T8S User Manual

There are 7 parameter setup menus:
No. Menu
1 SERVO
*
2 BASIC
3 ADVANCED
4 SYSTEM
The above menus are all available on Android APP V7.1 and above. Menu No 1. to 4 are available on Apple
APP. The latest APP will be frequently updated on RadioLink official website

3.3.1 SERVO Menu

The 8 rectangles show the CH1-CH8 servos range (4 basic
channels and 4 auxiliary channels) from left to right. CH1--Aileron,
CH2 - Elevator, CH3 - Throttle,CH4--Rudder, CH5 to CH8--Auxiliary
channels

3.3.2 BASIC Menu

There are 6 parameters to setup including" REV" "SUB" "EPA-L" "EPA-R" "F/S" "DELAY"
REV: Defines the relationship between the transmitter controls and the receiver output for channels with
options of NORM and REV. Make sure to check all servos move to the correct direction as wish under control.
Make sure to check all servos move to the correct direction under control.
Note
If programmable mix control function is used to control several servos for fixed wing/gliders,
No. Menu
5 SYSTEM2
6 TH/CURE
7 DR/CURE
8 RESET
www.radiolink.com
7
Radiolink Electronic Ltd
www.radiolink.com
.