Using Your Mask - ResMed AirFit P10 User Manual

operating, insufficient fresh air will be provided through the mask,
and the exhaled air may be rebreathed. Rebreathing of exhaled air
for longer than several minutes can, in some circumstances, lead
to suffocation. This applies to most models of CPAP devices.
Note: For any serious incidents that occur in relation to this device, these
should be reported to ResMed and the competent authority in your
country.

Using your mask

For a full list of compatible devices for this mask, see the Mask/Device
Compatibility List on ResMed.com/downloads/masks. If you do not have
internet access, please contact your ResMed representative.
Humidification
The HumidX and HumidX Plus are waterless humidifiers. These are
designed to provide more comfort by improving the moisture level in the
air you breathe and offering relief from possible dryness.
The HumidX is a good starting point for finding the right level of
humidification. The HumidX Plus will improve the humidity level further
and is useful when the ambient humidity level is very low (eg. high
altitudes, on an aircraft).
The HumidX and HumidX Plus must be replaced within 30 days of
opening the HumidX/HumidX Plus pack.
Fitting
To set up your AirMini machine, refer to the AirMini user guide. Once you
have set up your AirMini, follow these steps to fit your mask.
1. Align your left (L) and right (R) pillows with your left and right nostrils.
Pull the headgear bands over your head. Your lower headgear band
should sit comfortably at the back of your head. The top band should
sit comfortably on your crown.
2. To ensure a comfortable fit, briefly pull your mask away from your
nose and reseat the pillows. Ensure the nasal pillows fit securely into
your nostrils with both pillows positioned upright.
3. Your mask is now fitted and ready to use. When the device is running,
a light breeze should be felt near the venting area around the tube
English 3