Technical Specifications - ResMed AirFit P10 User Manual

Technical specifications

Notes:
•
The AirFit P10 for AirMini, when connected to the AirMini system, contains a vent
system to prevent CO
•
For technical Specifications related to venting, refer to the AirMini User Guide
Dead Space
Information
Therapy
pressure
Environmental
conditions
Sound
Gross
dimensions
Service Life
Note: The manufacturer reserves the right to change these specifications without notice.
build-up in the mask.
2
The physical dead space is the empty volume of the mask up to the
compatible tubing connector. Using the large cushions it is 40mL.
4 to 20 cm H O
2
Operating temperature: 41°F to 104°F (+5°C to +40°C)
Operating humidity: 10% to 95% non-condensing
Storage and transport temperature: -13°F to 158°F (-25°C to +70°C)
Storage and transport humidity: 5-95% relative humidity non-
condensing
DECLARED DUAL-NUMBER NOISE EMISSION VALUES in accordance
with ISO 4871. The A-weighted sound power level of the mask is
22 dBA, with uncertainty of 3 dBA. The A-weighted sound pressure
level of the mask at a distance of 1 m is 15 dBA, with uncertainty of
3 dBA.
Large:
6.89" (H) x 5.87" (W) x 1.46" (D)
(175 mm (H) x 149 mm (W) x 37 mm (D))
Mask frame system (no headgear)
The service life of the AirFit P10 for AirMini mask is dependent on
the intensity of usage, maintenance, and environmental conditions to
which the mask is used or stored. As this mask and its components
are modular in nature, it is recommended that the user maintain and
inspect it on a regular basis and replace the mask system or any
components if deemed necessary or according to the 'visual criteria
for product inspection' in the 'Cleaning your mask at home' section of
this guide. Refer to the 'Mask components' section of this guide for
information of how to order replacement parts.
For the Service life of the AirMini tube, vent module and
HumidX/HumidX Plus refer to the AirMini device user guide.
English 9