ResMed AirFit P10 Manual

AirFit P10
Fitting Guide for
1 2
• Hold the pillows at your nose, ensuring that • Stretch the lower strap around the back
the pillow size indicator is on the bottom of your head.
and you can see the left (L) and right (R)
• The top strap should sit comfortably on
orientation indicators.
top of your head.
4
• Move the mask away from your face, and then place it back again.
• Ensure the nasal pillows fit securely into your nostrils with both pillows positioned upright.
Adjustment
• If adjustment is needed, simply spread the upper and lower straps apart to loosen, or draw them closer together to tighten.
Note: For complete user instructions, refer to the AirFit P10 User Guide.
DISTRIBUTED BY
ResMed Corp, 9001 Spectrum Center Boulevard, San Diego, CA 92123 USA
ResMed Corp San Diego, CA, USA +1 858 836 5000 or 1 800 424 0737 (toll free). ResMed Ltd Bella Vista, NSW, Australia
+61 (2) 8884 1000 or 1 800 658 189 (toll free). See ResMed.com for other ResMed locations worldwide. AirFit, QuickFit
and QuietAir are trademarks of ResMed Ltd. Swift is a trademark of ResMed Ltd and is registered in the U.S. Patent and
Trademark Office. ©2013 ResMed. Specifications may change without notice. 1016801/1 2013-10
ResMed.com
3
• Pull the headgear over your head by holding
the lower strap.
5
• Finally, connect the end of the mask's tube
into your device's air tubing.
• Turn on your device — your mask is now
ready to use.
AirFit
P10
Nasal Pillows System
AirFit P10 ... a quieter mask to fit your sleep.
TM
The ResMed AirFit P10 nasal pillows mask delivers the premium performance and reliability of the Swift
™
mask, yet it's approximately 50% lighter and 50% quieter.
40 minutes longer per night using the AirFit P10 compared to the leading nasal pillows mask.
Benefits for you ...
Supports patient acceptance thanks to ease
of use, lighter weight and greater comfort.
QuickFit auto-adjusting headgear can be
™
fitted in 30 seconds or less.
3
Simple sizing and color-coded pillows make
fitting easier, encouraging patient compliance.
* Declared dual numbered noise emission values (with uncertainty 3dBA) in accordance with ISO 4871.
1 ResMed Ref: D000-0201; eLB0798-206.
2 ResMed Clinical Study FECS3 Ref: D629-117 (page 11). ResMed objective data (pressure, leak, usage, AHI).
3 ResMed Clinical Study FECS3 Ref: D629-117 (page 9). 90% of participants fitted the mask comfortably in
less than 30 seconds.
™
A recent study found that patients slept more than
1
2
... and your patients
QuietAir ™ woven-mesh vent makes this
ResMed's quietest mask at just 21.4 dBA.*
2
Minimal design and light weight (1.6 oz)
deliver a high level of comfort and facial freedom.
Just three parts — frame, cushion and headgear —
make it easy to assemble and take apart for cleaning.
AirFit
P10
Nasal Pillows System
FX