Did you know? Replacing your mask and supplies is one of the most important steps in maintaining effective therapy. Replace when... • The mask frame is damaged. • The cushion is cracked, torn or damaged in any way. • The headgear is stretched and does not return to its original form after washing.
ASAL ILLOWS YSTEM Thank you for choosing the AirFit P10. Please read the entire manual before use. This document provides the user instructions for the AirFit P10 and AirFit P10 for Her masks referred to collectively as AirFit P10 throughout this manual. AirFit P10 has blue headgear while AirFit P10 for Her has pink headgear.
Page 10
If you experience nasal dryness or irritation, using a humidifier is recommended. GENERAL WARNINGS The mask must be used under qualified supervision for users who are unable to remove the mask by themselves. The mask may not be suitable for those predisposed to aspiration.
Page 11
The technical specifications of the mask are provided for your clinician to check that they are compatible with the CPAP or bilevel device. If used outside specification or if used with incompatible devices, the seal and comfort of the mask may not be effective, optimum therapy may not be achieved, and leak, or variation in the rate of leak, may affect the CPAP or bilevel device function.
Adjustment To achieve a comfortable fit, adjust the split straps by spreading them apart to loosen (a) or draw them closer together to tighten (b). Removal To take off your mask system, pull the mask and headgear by the split-strap, up and over your head. Disassembly 1.
Page 13
WARNING Always follow cleaning instructions and use mild soap. Some cleaning products may damage the mask, its parts and their function, or leave harmful residual vapours that could be inhaled if not rinsed thoroughly. CAUTION If any visible damage of a system component is apparent (cracking, crazing, tears or cushion damage), the component should be discarded and replaced.
This mask should be reprocessed when used between patients. Cleaning, disinfection and sterilization instructions are available from the ResMed website, www.resmed.com/masks/sterilization/americas. If you do not have internet access, please contact your ResMed representative. Troubleshooting Problem/possible cause Solution Pillows won’t seal properly, are uncomfortable or cause red marks...
Problem/possible cause Solution Vent is blocked or If the vent requires cleaning, use a dirty/discolored. soft bristle brush. The vent may discolor over time and this is not a safety concern. Follow the cleaning instructions in this guide to maintain performance and safety of the mask.
Page 16
Gross dimensions Large: 23.23" (H) x 5.87" (W) x 1.18" (D) (590 mm (H) x 149 mm (W) x 30 mm (D)) Mask frame system (no headgear) Mask setting For S9: Select 'Pillows' options For other devices: Select 'SWIFT' (if available), otherwise select 'MIRAGE' as the mask option.
Page 17
Symbols The following symbols may appear on your product or packaging: Catalog number Batch code Humidity limitation Temperature limitation Fragile, handle with care Not made with natural rubber latex Manufacturer European Authorized Representative Keep away from rain This way up Indicates a Warning or Caution and alerts you to a possible injury or explains special measures for the safe and effective use of the device...
This warranty is only available to the initial consumer. It is not transferable. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components. This limited warranty does not cover: a) any damage caused as a result of improper use, abuse, modification or alteration of the product;...