Network Setup - AL Tech Mediagate MG-35 Manual

3.2.3 Network Setup

It is possible to obtain IP address automatically from DHCP Server or IP Router, or set the specific IP address. Check
your network environments.
DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router.
DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server
or IP Router, you have to use this option. Just write IP address and Subnet mask.
① Turn on MG-35 and press [SETUP] in Mode
Selection screen.
'DHCP On' Setup Procedure
② Move to 'Network' icon and press [ENTER].
Setup box will be displayed under icon menu.
③ Move to DHCP On and press [ENTER].
④ Finally, press [SETUP] again for saving
configurations.
Check 'IP address obtained automatically'
When you use 'DHCP On', you can see the IP
address in MENU screen after selecting 'PC-
Network] icon in Mode Selection screen.
33