Muting Calls; Using The Navigation Bar; Table 4. Menu Navigation Bar - ADTRAN IP 712 User Manual

Basic Features

Muting Calls

To mute a call any time during an active call, use the following steps:
1. Press the Mute function key.
2. The LED flashes red indicating the call has been muted.
3. Press the Mute function key again to cancel.

Using the Navigation Bar

The IP 706 and IP 712 phone settings are accessed through the various menus presented on the LCD
display. As previously discussed, there are menus associated with soft keys (displayed across the bottom of
the LCD), as well as a main menu that is displayed when the Menu key in the center of the phone's face is
pressed.
The navigation bar enables you to scroll through the menus presented on the LCD display, as well as make
selections. See Table 4 below
Function
Button
Scrolls up the list.
Scrolls down the list.
Scrolls to the right.
Scrolls to the left.
OK Selects the highlighted menu item.
MENU Displays the Main menu on the LCD.
Cancels the selection and returns to
CANCEL
idle menu state.
34
While mute is enabled, you can still hear the caller's voice but they cannot hear
any audio from your side of the conversation.
for a description of each button on the navigation bar.

Table 4. Menu Navigation Bar

Incoming Calls
MENU
Description
Copyright © 2011 ADTRAN, Inc.
ADTRAN IP 700 Series Phone User Manual
Personal Contacts
Placed Calls
OK
CANCEL
Missed Calls
In an idle menu state, the up arrow also serves
as a shortcut to the user's Personal Contacts
directory.
In an idle menu state, the down arrow also
serves as a shortcut to the Missed Calls Log.
In an idle menu state, the right arrow also
serves as a shortcut to the Placed Calls Log.
In an idle menu state, the left arrow also serves
as a shortcut to the Incoming Calls Log.
Note
6AOSUG0001-1A