Retrieving Messages; Conferencing A Call - ADTRAN IP 712 User Manual

ADTRAN IP 700 Series Phone User Manual
8. When you choose to implement DND, press the line key labeled DND. When DND is enabled, the
DND line key icon, as well as the icons for all other available lines, will change to the following
icon:
9. To disable DND, press the line key labeled DND again.

Retrieving Messages

Once your voicemail system has been set up, messages can be retrieved with the touch of a button. To
retrieve messages, use the following steps:
1. Press the Messages function key.
2. Follow the prompts for retrieving messages.
The system administrator is responsible for configuring the voicemail system. If you
cannot retrieve your voicemail messages, contact the system administrator.

Conferencing a Call

Conferencing a call allows a third extension to be added to an active call. To conference a third party into
the call, follow these steps:
1. Press the Conference function key during an active call. The active call will be placed on hold,
and the hold icon (shown below) will appear:
The next available line, used for dialing the third party, will display the ringback icon (shown
below):
2. At the prompt, enter the phone number of the third party to add.
3. When the second call is connected, press the Conference key again to add the call to the
conference. The conference icon (shown below) will display:
Only three parties can be conferenced at one time. If one party disconnects, another
party can be added.
6AOSUG0001-1A Copyright © 2011 ADTRAN, Inc.
Basic Features
39