Table of Contents
Advertisement
Answering a Call
Using the Handset:
Pick up the handset.
Using Hands-Free Speakerphone Mode:
Press (^), or with the handset on hook press the
line key with the active indicator, or the Answr
softkey.
Using the Headset:
Press (2) to answer the call through an
optionally connected headset.
by pressing the Reject soft key or
invoking Do Not Disturb during
ringing. Note thatDoNotDis¬
turb stays active when the call is
In all cases, the active call will appear on the
display showing call duration and destination.
Call Hold and Resume
During a call, press (") or the Hold soft key.
The call will be placed on hold and this will be
indicated on the display. Press the Resume soft
key, or the line key to retrieve the call.
Multiple Calls on Hold
If multiple calls are on hold on a single
line key, use the arrow keys to switch be¬
tween the calls then press the Resume soft
key to retrieve the desired call. If more
than two calls are on hold on a single key,
an indication will appear on the display,
for example "2/3" shows that this is the
second call out of three calls.
If calls are on hold on more than one line
key, the details of the calls on any line key
can be viewed by pressing that line key
and holding it down for a few seconds. If
a line key is pressed briefly, the first call
on hold on that line key will be retrieved.
Microphone Mute
During a call, press ($). The LED on the
phone lights up and a flashing microphone
on the display indicates that the other party
(parties) cannot hear you.
To turn off Microphone Mute, press ®
Microphone Mute applies to all modes:
still hear all other parties while Mute is
enabled.
Advertisement
Table of Contents
