Using Park - ADTRAN IP 712 User Manual

Basic Features

Using Park

Parked calls are created by placing an incoming call on hold in a park orbit where it may be retrieved from
any phone on the system without tying up the external or outgoing phone lines.
Manually Parking a Call
Use the following steps to park a call:
1. Press the Park soft key during an active call.
2. Select a park orbit number to assign to the call. Selection range is from 0 to 9.
3. Press the Ok soft key.
4. The call will be disconnected and placed in park.
Retrieving Manually Parked Calls
Parked calls are retrieved from any phone in the system by using the Pickup and Retrieve features. To
pickup and retrieve parked calls, use the following steps:
1. Press the Pickup soft key.
2. Select the park orbit number of the call you wish to retrieve by pressing the associated number on
the keypad.
3. Press the Ok soft key.
Automatically Parking a Call
Calls can be parked without having to specify a park orbit number if the status group to which the
phone is subscribed has one or more park zones defined. Use the following steps to park a call using a
park zone:
1. Press the Park <number> line key during an active call. The <number> variable is the number of
the park zone and is determined by the status group to which the phone is subscribed.
2. The call will automatically be parked on the park zone, and the Park <number> line key will
change to Retrieve allowing the parked call to be retrieved.
Retrieving Automatically Parked Calls
Automatically parked calls are retrieved from any phone in the system by using the Retrieve feature.
Any phone subscribed to a status group containing the park zone will be able to retrieve the call. To
retrieve an automatically parked call, press the Retrieve line key.
36
ADTRAN IP 700 Series Phone User Manual
Copyright © 2011 ADTRAN, Inc. 6AOSUG0001-1A