Get Counter Status; Get Do Pulse Count And Continue Mode - Advantech WISE-2934 Series User Manual

5.3.10

Get counter status

Advantech I/O get counter status node
1. Add the get counter status node in Node-RED.
2. Fill in the settings.
Enter the channel number.
3. Node input.
Send any input to this node to get counter status of specific channel.
4. Node output.
Outputs msg.payload as the counter status. 0 is stop, 1 is start.
Outputs msg.error as the error status.
5. Please find Node-RED built-in examples

Import Library
5.3.11

Get DO pulse count and continue mode

Advantech I/O get do pulse node
1. Add the get do pulse node in Node-RED.
2. Fill in the settings.
Please fill the channel number.
3. Node input.
Send any input to this node to get pulse status of specific channel.
4. Node output.
Output 1
– It then outputs msg.payload as the Pulse output count.
– It then outputs msg.error as the error status.
Output 2
– It then outputs msg.payload as the continue mode.
– It then outputs msg.error as the error status.
5. Please find Node-RED built-in examples.

Import Library
 
Advantech Local_IO
 
Advantech Local_IO
45

get_counter_status

get_do_pulse
WISE-2834 User Manual