Led Status Indicators; Com Port Interface (Com1, Com2, Com3); Lan Connector (Lan1 ~ Lan2); Power Connector - Advantech WISE-710-N600A User Manual

2.2

LED Status Indicators

LED Status
Green
PWR
Off
WLAN Green
Green
COM1~3
Flashing Green
2.3

COM Port Interface (COM1, COM2, COM3)

WISE-710-N600A features one RS232/485 (DB9), one RS485/CAN bus (2-pin termi-
nal), and one RS485 (3-pin terminal) port. The COM port settings can be adjusted
using the on-board switches (Refer to Appendix A.3).
2.4

LAN Connector (LAN1 ~ LAN2)

WISE-710-N600A is equipped with a dual Gigabit LAN controller and Realtek
RTL8364NBI Ethernet controller chip that is fully compliant with IEEE 802.3u 10/100/
1000 BASE-T. The Ethernet port is a standard RJ-45 jack. LED indicators provided at
the front show the device's Link (green/orange) and Active (green LED) status (Refer
to Appendix A.2).
2.5

Power Connector

WISE-710-N600A comes with a connector that supports 24 V
tures reversed wiring protection. This means that reversed wiring of the ground and
power lines will not cause system damage (Refer to Appendix A.1).
2.6

Digital Input and Output

WISE-710-N600A features four digital input and four digital output channels config-
ured via GPIO pins for most On/Off, trigger, and status readings.

Figure 2.3 WISE-710-N600A Underside View

Description
Power is on
Power is off
Signals are being transmitted and received
Standby
Signals are being transmitted and received
7
power input and fea-
DC
WISE-710-N600A User Manual