Status Led And Battery Level Leds Description - dji MAVIC 2 ENTERPRISE Advanced User Manual

MAVIC 2 ENTERPRISE Advanced
Make sure the antennas of the remote controller are unfolded and adjusted to the proper position to
achieve optimal transmission quality.
Repair or replace the remote controller if damaged. A damaged remote controller antenna greatly
decreases performance.
Fully charge the battery at least once every three months to maintain battery health.

Status LED and Battery Level LEDs Description

The battery level LEDs displays the battery level of the controller. The status LED displays the linking
status and warnings when the battery level is low, the temperature is high, and the control sticks are
not centered.
Status LED
Solid Red
Solid Green
Blinks Blue
Blinks Red
Blinks Yellow
Blinks Cyan
Solid Blue
Solid Yellow
40
©
2021 DJI All Rights Reserved.
User Manual
Status LED
Description
The remote controller is not linked to an aircraft.
The remote controller is linked to an aircraft.
The remote controller is linking to an aircraft.
The temperature of the remote controller is too high or the battery level of
the aircraft is low.
The battery level of the remote controller is low.
The control sticks are not centered.
The remote controller firmware updated successfully.
The remote controller firmware update failed.
Battery Level Indicators
Battery Level Indicators
Battery Level
75%~100%
50%~75%
25%~50%
0%~25%