Flight Test - dji MAVIC 2 ENTERPRISE Advanced User Manual

MAVIC 2 ENTERPRISE Advanced

Flight Test

Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the Aircraft Status Indicators facing towards you.
2. Power on the aircraft and the remote controller.
3. Launch DJI Pilot and enter the live view.
4. Wait until the Aircraft Status Indicator blinks green indicating that the Home Point has been
recorded and it is now safe to fly.
5. Push the throttle stick up slowly to take off.
6. To land, hover over a level surface and gently push the throttle stick down to descend.
7. After landing, hold the throttle stick down completely until the motors stop.
8. Power off the Intelligent Flight Battery before the remote controller.
Video Suggestions and Tips
1. The pre-flight checklist is designed to help you fly safely and to make sure that you can shoot
video during flight. Go through the full pre-flight checklist before each flight.
2. Select the gimbal operation mode in DJI Pilot.
3. Only shoot video when flying in P-mode or T-mode.
4. DO NOT fly in adverse weather conditions such as when it is raining or windy.
5. Choose the camera settings that best suit your needs. Settings include photo format and exposure
compensation.
6. Perform flight tests to establish flight routes and to preview scenes.
7. Push the control sticks gently to keep the aircraft movement smooth and stable.
It is important to understand the basic flight guidelines for the safety of both you and
those around you.
DO NOT forget to read the disclaimer and safety guidelines.
58
©
2021 DJI All Rights Reserved.
User Manual