dji MAVIC 2 ENTERPRISE Advanced User Manual page 35

Charging the Battery
There are two pairs of built-in 18650 Li-ion batteries in the remote controller. Charge the remote
controller using the USB-C port.
Charging Time: approx. 2 hours and 15 minutes. (using a standard USB charger adapter )
Power Outlet
100~240 V
Use a DJI official USB power adapter to charge the remote controller. If a DJI official adaptor is
unavailable, using a certified FCC/CE rated 12V/2A USB adapter is recommended.
The battery will deplete when stored for an extended period. Recharge the battery at least once every
three months to prevent over discharge.
Operating the Camera
Shoot photos and videos with the focus/shutter button and record button on the remote controller.
1. Focus/Shutter Button
Press to take a photo.
2. Record Button
Press once to start recording video and press again to stop.
3. Camera Settings Dial
Turn to adjust the zoom of the camera.
Controlling the Aircraft
The control sticks control the aircraft's orientation (yaw), forward and backward movement (pitch),
altitude (throttle), and left and right movement (roll). The control stick mode determines the function
of each control stick. There are three pre-programmed modes as well as custom modes that can be
configured in DJI Pilot. The modes are Mode 1, Mode 2, and Mode 3. The default mode is Mode 2. In
each of the three pre-programmed modes, the aircraft hovers in place at a constant orientation when
both sticks are centered. See the figures below to check the function of each control stick in the three
pre-programmed modes.
USB Charger USB-C Cable
MAVIC 2 ENTERPRISE Advanced
User Manual
©
2021 DJI All Rights Reserved.
35