Aircraft Leds And Status Indicator - dji MAVIC 2 ENTERPRISE Advanced User Manual

MAVIC 2 ENTERPRISE Advanced

Aircraft LEDs and Status Indicator

Mavic 2 Enterprise Advanced has Front LEDs and Aircraft Status Indicators as shown in the figure below.
Front LEDs
The Front LEDs show the orientation of the aircraft and glow solid red when the aircraft is powered on
to indicate the front of the aircraft. Go to settings in DJI Pilot to turn the Front LEDs on or off.
The Aircraft Status Indicators communicate the status of the flight control system of the aircraft. Refer to
the table below for more information about the Aircraft Status Indicators. The Aircraft Status Indicators
also flash when the Home Point is being recorded as described in the Return to Home section.
Aircraft Status Indicator States
Normal States
×2
Warning States
—
For missions that require concealed flight, enter camera settings in DJI Pilot and select Smart Arm
LEDs and turn all the LEDS off.
16
©
2021 DJI All Rights Reserved.
User Manual
Aircraft Status Indicator
Blinks red, green, and yellow
continuously
Blinks yellow and green alternately
Blinks green slowly
Blinks yellow twice continuously
Blinks yellow slowly
Blinks green quickly
Blinks green and blue alternately
Blinks yellow quickly
Blinks red slowly
Blinks red quickly
Blinks red
Solid red
Blinks red and yellow alternately
Blinks red and green alternately
Front LEDs
Aircraft Status Indicator
Powering on and performing self-diagnostic
tests
Warming up
P-mode with GPS
P-mode with Forward and Downward Vision
Systems
No GPS, Forward Vision System, or
Downward Vision System
Braking
RTK enabled and RTK data is being used
Remote controller signal lost
Low battery
Critically low battery
IMU error
Critical error
Compass calibration required
RTK enabled but RTK data unavailable