dji MAVIC 2 ENTERPRISE Advanced User Manual page 27

Charging the Battery
Fully charge the Intelligent Flight Battery before using for the first time:
1. Connect the AC power adapter to a power source (100-240 V, 50/60 Hz).
2. Attach the Intelligent Flight Battery to the AC power adapter using the battery charging cable with
the battery powered off.
3. The battery level LEDs display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when the battery level LEDs are all powered off.
Detach the AC power adapter when the battery is fully charged. It takes 1 hour and 30 minutes to
fully charge.
DO NOT charge an Intelligent Flight Battery immediately after flight as the temperature may be too high.
Wait until it cools down to room temperature before charging again.
The AC power adapter stops charging the battery if the battery cell temperature is not within the
operating range of 41° to 104° F (5° to 40° C). The ideal charging temperature is 71.6° to 82.4° F (22°
to 28° C).
The Battery Charging Hub (not included) can charge up to four batteries. Visit the official DJI online store
for more information.
Power Outlet
Battery Level LEDs During Charging
Battery Level LEDs
During Charging
Battery Level
Battery Protection
Battery Protection Mechanisms
LED1 LED2 LED3
AC Power Adapter
LED1
0%~25% 25%~50%
LED4 Blinking Pattern
LED 2 blinks twice per second
LED 2 blinks three times per
second
LED 3 blinks twice per second
LED 3 blinks three times per
second
LED 4 blinks twice per second
LED 4 blinks three times per
second
MAVIC 2 ENTERPRISE Advanced
Intelligent Flight Battery
LED2 LED3
50%~75%
Battery Protection Description
Overcurrent detected
Short circuit detected
Overcharge detected
Charger overvoltage detected
Charging temperature is too low
Charging temperature is too high
User Manual
LED4
75%~100%
©
2021 DJI All Rights Reserved.
27