Flight Recorder; Password Protection - dji MAVIC 2 ENTERPRISE Advanced User Manual

Note that the Vision Systems may not function properly when the aircraft is flying too fast. Fly with
caution when flying at over 10 m/s (32.8 ft/s) at 2 m (6.6 ft) or over 5 m/s (16.4 ft) at 1 m (3.3 ft).
Operate the aircraft cautiously when in any of the following situations:
a) Flying over monochrome surfaces (e.g., pure black, pure white, pure green).
b) Flying over highly reflective surfaces.
c) Flying over water or transparent surfaces.
d) Flying over moving surfaces or objects.
e) Flying in an area where the lighting changes frequently or drastically.
f) Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.
g) Flying over surfaces that strongly reflect or absorb infrared waves (e.g., mirrors).
h) Flying over surfaces without clear patterns or texture.
i) Flying over surfaces with repeating identical patterns or textures (e.g., tiles with the same design).
j) Flying over obstacles with small surface areas (e.g., tree branches).
Keep the sensors clean at all times. DO NOT tamper with the sensors. Do not obstruct the Infrared
Sensing System.
The Forward and Backward Vision Systems may not be able to recognize patterns on the ground in
low light conditions (less than 100 lux). If the aircraft speed exceeds 31 mph (50 kph), the Forward
and Backward Vision Systems do not have enough time to brake and stop the aircraft at a safe
distance from an obstacle.
If the aircraft is involved in a collision, it may be necessary to calibrate the Vision Systems. Calibrate
the Vision Systems if the app prompts you to do so.
Do not fly if it is rainy, foggy, or if there is no clear sight.
Check the following each time before takeoff:
a) Make sure there are no stickers or any other obstructions over the glass of the Infrared Sensing
and Vision Systems.
b) Use a soft cloth if there is any dirt, dust, or water on the glass of the Infrared Sensing and Vision
Systems. Do not use any cleaning products that contains alcohol.
c) Contact DJI Support if there is any damage to the glass of the Infrared Sensing and Vision Systems.
The Upward Infrared Sensing System only detects in a straight line directly above the sensor and not
the entire area above the aircraft. Additionally, large obstacles such as roofs can be detected, but
tiny obstacles such as leaves or electrical wires cannot. Fly with caution and do not rely solely on the
Upward Infrared Sensing System to detect obstacles above the aircraft.
Do not obstruct the Downward Vision System or Downward Infrared Sensing System before takeoff.
Otherwise, the aircraft cannot take off again after landing and will have to be restarted.

Flight Recorder

Flight data including flight telemetry, aircraft status information, and other parameters are automatically
saved to the internal data recorder of the aircraft. The data can be accessed using DJI Assistant 2
(Enterprise Series).

Password Protection

Mavic 2 Enterprise Advanced supports password protection. This feature helps ensure secure access
to the aircraft and its onboard data storage, which helps prevent the leaking of sensitive information.
To set, change, or delete the password, launch the DJI Pilot app, select Settings, and then Security
Password.
MAVIC 2 ENTERPRISE Advanced
User Manual
©
2021 DJI All Rights Reserved.
23