dji MAVIC 2 ENTERPRISE Advanced User Manual page 8

MAVIC 2 ENTERPRISE Advanced
* Attach the gimbal cover when not in use.
1) Hold the gimbal in place and insert the gimbal clamp
between the aircraft and the gimbal.
2) Make sure the hooks on the gimbal protector are
locked in the grooves of the aircraft. Lower the gimbal
protector over the gimbal and secure with the buckle.
2
The buckle will click when it is securely attached.
1
3. Attach the propellers with white marks to the motors with white marks. Press the propeller down
onto the motors and turn until it is secure. Attach the unmarked propellers to the unmarked
motors. Unfold all the propeller blades.
4. All Intelligent Flight Batteries are in Hibernation mode before shipping to ensure safety. Use the
provided AC power adapter to charge and activate Intelligent Flight Batteries for the first time. To
charge an Intelligent Flight Battery after flight, remove from the aircraft and attach to the AC power
adapter.
Unfold the front arms and propellers before unfolding the rear arms.
It is normal for there to be friction on the arms and aircraft due to the folding design of Mavic 2
Enterprise Advanced.
Make sure the gimbal cover is removed and all arms and propellers are unfolded before powering
on the aircraft. Otherwise, it may affect the aircraft's self-diagnostics.
8
©
2021 DJI All Rights Reserved.
User Manual
3
Power Outlet
100~240 V
Gimbal clamp
Grooves Hooks
A
Charging Time:
~1 hour 30 minutes
A