Activation - dji MAVIC 2 ENTERPRISE Advanced User Manual

Activation

Activating the Smart Controller
The Smart Controller needs to be activated before using it for the first time. Make sure the
remote controller is connected to the internet during activation. Follow the steps below to
Internet
activate.
1. Power on the remote controller. Select the language and tap Next. Carefully read the terms of use
and privacy policy and tap Agree. Set the country/region.
2. Connect the remote controller to the internet via Wi-Fi. After connecting, tap Next to continue and
select the time zone, date, and time.
3. Log in with a DJI account. If you do not have an account, create a DJI account and log in.
4. Tap Activate on the activation page.
5. After activating, select whether to join the Smart Controller Improvement Project. The project helps
to improve the user experience by automatically sending diagnostic and usage data daily. No
personal data will be collected by DJI.
6. The remote controller will check for firmware updates. If a firmware update is available, a prompt
will appear to download the latest version.
Check the internet connection if the activation fails. If the internet connection is normal, try to activate
the remote controller again. If the issue persists, contact DJI.
Activating the Aircraft
Mavic 2 Enterprise Advanced requires activation before using it for the first time. Follow the onscreen
instructions to activate Mavic 2 Enterprise Advanced using DJI Pilot.
MAVIC 2 ENTERPRISE Advanced
User Manual
©
2021 DJI All Rights Reserved.
13