Installing The Os/2 Driver; Laps Installation - 3Com TokenLink 3C339 User Manual

8 Click Yes to restart the computer.
This concludes the procedure for installing the driver for
Windows 95 under OSR2.

Installing the OS/2 Driver

To install the OS/2 driver, you need one of the following
IBM installation programs:

LAPS Installation

To install the OS/2 driver with LAPS, you must be
running OS/2 version 2.11 or later, including any software
fixes for PCI support. (For OS/2 fix packs, contact IBM.)
You also need to know the names of the network
protocols your network environment uses.
1 Insert TokenDisk diskette #2 in the floppy drive.
2 Open an OS/2 window. At the OS/2 prompt, enter:
laps
LAPS is usually located in the \IBMCOM directory on the
boot drive.
3 In the LAPS window, select Install. At the prompt
for the source of the .NIF file, type the following
path and click OK:
a:\ndis\os2
4 When the Installation Complete for PCI Token Ring
Adapter message appears, click OK.
The LAPS dialog box appears.
5 Select Configure.
6 Verify that the Configure LAN Transport radio
button is selected, and click Continue.
The Configuration Workstation panel appears.
LAN Adapter and Protocol Support (LAPS)
Multi Protocol Transport Services (MPTS)
Installing the OS/2 Driver 3-17