Autolink Troubleshooting; About Installing On A Netware Server; One Nic In A Server - 3Com TokenLink 3C339 User Manual

AutoLink Troubleshooting

If you experience problems when using the AutoLink
program, display or print the AUTOLINK.LOG file, which
contains a log of the events that occurred during the
AutoLink installation and configuration process.
1 To display the file, enter the following DOS
command:
type autolink.log | more
2 To print the file, connect to a local printer and enter:
copy autolink.log prn

About Installing on a NetWare Server

NetWare Loadable Modules (NLMs) permit the
3C3X9.LAN NetWare 4.x server driver to be used with
NetWare versions 3.11, 3.12, or 4.x. The driver and NLM
files are in the following locations on
TokenDisk diskette #1:
Use the most recent NLMs available. Compare the
versions that accompanied your NetWare software
with the appropriate files on TokenDisk diskette #1.
For the latest NLMs, contact Novell.
For more details on the driver and examples
of server installation options, see the
\NETWARE\SERVER\3C3X9SRV.TXT file on
TokenDisk diskette #1.

One NIC in a Server

This section describes procedures for installing the driver
when you are running NetWare and have installed a
single NIC in a computer that is functioning as a server.
Before installing the driver, see the previous section
"About Installing on a NetWare Server" for important
information about NetWare Loadable Modules.
NetWare 3.11: \NETWARE\SERVER\3.11
NetWare 3.12: \NETWARE\SERVER\3.12
NetWare 4.x: \NETWARE\SERVER\4.X
Installing NetWare Drivers 3-7