Windows 95 - 3Com Fast EtherLink 3C515-TX User Manual

4-4 C
HAPTER
12 Click Yes to all prompts.
The Windows setup program asks for the NDIS.386 file.
13 If prompted, remove the EtherDisk diskette and
insert Microsoft Windows for Workgroups 3.11
Disk 7 and click OK.
14 If prompted for the EL515.DOS driver, remove any
diskette in drive A and insert the 3Com EtherDisk
diskette in drive A. To load the NDIS 2 driver, type
this path:
a:\ndis2\dos [Enter]
15 Click OK.
The PROTOCOL.INI and SYSTEM.INI files have been
modified. WFW saves the old versions with the extension
.001, where the number is incremented every time a new
PROTOCOL.INI or SYSTEM.INI file is generated.
16 Click OK.
17 Restart your system when prompted.
The NDIS 2 driver installation is complete.

Windows 95

To install the NDIS 2 driver on a PC running Windows 95,
follow these steps:
1 Turn on the PC and start Windows 95.
A message appears, informing you that Windows 95 is
detecting new hardware and is looking for the drivers.
If you are installing this NIC for the first time, you are
prompted to install the driver from a diskette provided by
the hardware manufacturer.
2 Insert the 3Com EtherDisk diskette and click OK.
3 Specify the letter of the floppy drive location. For
example, if your floppy drive is drive A, type:
a:\ [Enter]
4: I NDIS N
NSTALLING THE
D
ETWORK RIVER