Installing The Ndis 3.X Driver; Windows For Workgroups - 3Com Fast EtherLink 3C515-TX User Manual

6 Click Start, then Settings.
7 Select Control Panel.
8 In the Control Panel, click Network and Add.
9 Select Adapters and 3Com.
10 Click Have Disk.
11 Insert the EtherDisk diskette in the floppy drive.
12 Enter the letter of the floppy drive location.
13 Click OK.
14 Select the Fast EtherLink ISA NIC from the list and
click OK.
15 Select the NIC again and click Properties.
16 In the Driver Type tab, click Real Mode (16 bit)
NDIS Driver.
17 Click OK.
18 Click Restart Computer.
The NDIS 2.0 driver update for Windows 95 is complete.

Installing the NDIS 3.x Driver

This section explains how to install the NDIS 3.x driver for
a PC running one of these operating systems:

Windows for Workgroups

To install the NIDS 3.x driver for a PC running
Windows for Workgroups (WFW), follow these steps:
1 Start Windows for Workgroups.
2 In the Network group, click the Network Setup icon.
3 In the Network Setup dialog box, select Drivers.
4 In the Network Drivers dialog box, select
Add Adapter.
Windows for Workgroups
Windows 95
Windows NT
Installing the NDIS 3.x Driver 4-9