Updating The Ndis 2.01 Driver; Dos Or Windows 3.X Update; Windows 95 Update - 3Com Fast EtherLink 3C515-TX User Manual

4-8 C
HAPTER

Updating the NDIS 2.01 Driver

This section describes how to update the NDIS 2.01 driver.

DOS or Windows 3.x Update

To update the NDIS 2.01 driver for a PC running DOS or
Windows 3.x, proceed as follows:
1 Boot the PC under DOS.
For Windows 3.x, exit Windows completely to the DOS
prompt (select File, Exit Windows, OK).
2 Insert the EtherDisk diskette in drive A and at the
DOS prompt, type:
a:\install [Enter]
If the 3Com license screen appears, type
terms and conditions.
3 On the main menu screen, select Driver Installation
and Update and press [Enter].
4 On the Network Drivers screen, select NDIS Driver
Installation and Information and press [Enter].
5 On the NDIS Drivers screen, select Update NDIS
Drivers and press [Enter].
6 On the Update NDIS Drivers screen, select Update
DOS NDIS 2.01 Driver and press [Enter].
Follow the instructions on the screen to update the
NDIS 2.01 driver.

Windows 95 Update

1 Start Windows 95.
2 Click Start, then Settings.
3 Select Control Panel.
4 In the Control Panel, click Network, and select
Fast EtherLink ISA NIC.
5 Click Remove and OK.
You are prompted to restart your PC.
4: I NDIS N
NSTALLING THE
D
ETWORK RIVER
to accept the
Y