3Com Fast EtherLink 3C515-TX User Manual page 28

3-8 C 3: I
HAPTER
3 Turn the PC on and start Windows 95.
A message appears, saying that new hardware has
been found.
4 When the New Hardware Found dialog box appears,
select Driver from disk provided by hardware
manufacturer and click OK.
The Install from Disk dialog box appears.
5 Insert the EtherDisk diskette in drive A and click OK.
Windows 95 copies the needed files from the EtherDisk
diskette and prompts you for the Windows 95 diskettes
or CD. Follow the instructions provided.
After the files are copied, a dialog box appears, asking if
you want to reboot your PC.
6 Before you reboot, complete the following steps to
ensure a successful connection to your network.
7 Double-click the My Computer icon.
8 Double-click the Control Panel icon.
9 Double-click the Network icon.
The Network dialog box appears.
10 Remove the following network components:
Microsoft Client for Microsoft Network
NetBEUI
The network components should now include:
Client for NetWare Networks
3Com Fast EtherLink ISA Parallel Tasking NIC
IPX/SPX Compatible Protocol
11 Click Client for NetWare Networks.
12 Click Properties.
13 Under the General tab, set your preferred server
and the first network drive.
N
NSTALLING THE OVELL
N W D
ET ARE RIVER