10/100 Auto Negotiation (Nway); Remote Nic Management; System Requirements - 3Com Fast EtherLink 3C515-TX User Manual

1-2 C
HAPTER

10/100 Auto Negotiation (NWay)

The 3C515-TX NIC automatically runs at the speed
that the connected hub supports, using NWay, an
IEEE 802.3 standard. The 3C515-TX NIC also works
with any other non-NWay 10BASE-T or 100BASE-TX
IEEE-compliant products.

Remote NIC Management

3Com's Transcend
which need only 6 KB of memory, allow network
management of the 3C515-TX NIC and the PC in which
it is installed. You can get the driver agents from 3Com's
Transcend PC Link SmartAgent software or from 3Com's
bulletin board service (BBS). See Appendix B for
information on the BBS.
For more information on Transcend WorkGroup Manager
software, contact your authorized 3Com representative.

System Requirements

The 3C515-TX NIC can be installed in any PC that meets
the following requirements:
Make sure you are running the latest BIOS for your PC.
1: I
NTRODUCTION
Use of Category 3, 4, or 5 UTP cabling for 10BASE-T
Ethernet networks and Category 5 for 100BASE-TX
Fast Ethernet networks
Boot ROM (3C515-TRIROM)
®
80386, 80486, or Pentium PC
Available 16-bit ISA slot
640 K of memory (minimum)
PC Link SmartAgent
®
driver agents,