Emerson ATCA-F120 Installation And Use Manual page 38

Hardware Preparation and Installation
Any optional items ordered
2. Check for damage and report any damage or differences to the customer service.
3. Remove the desiccant bag shipped together with the blade and dispose of it
according to your country's legislation.
The blade is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, please contact our customer's service immediately.
2.3 Environmental and Power Requirements
The following environmental and power requirements are applicable to the blade.
2.3.1 Environmental Requirements
You must make sure that the blade, when operated in your particular system configuration,
meets the environmental requirements specified below.
Operating temperatures refer to the temperature of the air circulating around the blade, and
not to component temperatures.
If you integrate the blade in your own, non-Emerson, system, please contact your local sales
representative for further safety information.
Blade Damage
High humidity and condensation on the blade surface causes short circuits.
Do not operate the blade outside the specified environmental limits. Make sure the blade is
completely dry and there is no moisture on any surface before applying power.
Do not operate the blade below -5°C.
38
ATCA-F120 Installation and Use (6806800D06F)