Emerson ATCA-F120 Installation And Use Manual page 31

Introduction
1.1 Features
The ATCA-F120 is an AdvancedTCA
AdvancedTCA Base Specification and PICMG 3.1 Revision 1.0 Specification Ethernet/Fiber Channel
for AdvancedTCA Systems.
The blade provides the following Ethernet interfaces:
15 1000BaseT base channel interfaces via backplane
15 10G-BX4/1000BX fabric channel interfaces via backplane
SERDES interface via update channel
One 1000Base-T management interface via face plate
One Base Channel extension interface via face plate
One 1000BaseT face plate interface which connects to AMC bay B1
Optional Rear Transition Module (RTM)
Further features of the ATCA-F120 are the following:
Freescale MPC8548E PowerQUICC III CPU
At least 512 MBytes DDR2 SDRAM main memory with ECC support
Dual boot flashes of 32 MBytes each
Two NAND flashes with a size of two GBytes each
Real-time clock
Serial interface via face plate
Serial interface via Update Channel (connection to second ATCA-F120 in the system)
Support for two AMC bays
AMC and backplane support for Clock Generator Module
On-board IPMC
ATCA-F120 Installation and Use (6806800D06F)
™
switch blade as defined in the PICMG 3.0 Revision 2
Chapter 1
31