Emerson ATCA-F120 Installation And Use Manual page 110

U-Boot Firmware
5.7 Linux Devices
The following table lists all predefined Linux character devices and the respective memory
blocks which they are assigned to.
Table 5-2 Linux Devices
Linux Device Name
/dev/mtd0
/dev/mtd1
/dev/mtd2
/dev/mtd3
/dev/mtd4
/dev/mtd5
/dev/mtd6
/dev/mtd7
/dev/mtd8
/dev/mtd9
/dev/mtd10
/dev/mtdblock: (device
name used by Linux
kernel for booting)
/dev/mtd11
/dev/mtdblock; (device
name used by Linux
kernel for booting)
110
Content Memory Area
U-Boot boot 0xFE000000 -
parameters 0xFE01FFFF
Kernel image 0xFE020000 -
0xFE51FFFF
Empty 0xFE052000 -
0xFFF7FFFF
U-boot image 0xFFF80000 -
0xFFFFFFFF
-combined- 0xFE000000 -
0xFFFFFFFF
U-Boot boot 0xFC000000 -
parameters 0xFC01FFFF
Kernel image 0xFC020000 -
0xFC51FFFF
Empty 0xFC052000 -
0xFD7FFFFF
U-Boot image 0xFDF80000 -
0xFDFFFFFF
-combined- 0xFE000000 -
0xFFFFFFFF
NAND flash # 1 n.a.
NAND flash # 2 n.a.
Hardware Device
Active boot flash
Active boot flash
Active boot flash
Active boot flash
Active boot flash
Stand-by boot flash
Stand-by boot flash
Stand-by boot flash
Stand-by boot flash
Stand-by boot flash
NAND flash # 1
NAND flash # 2
ATCA-F120 Installation and Use (6806800D06F)