Emerson ATCA-F120 Installation And Use Manual page 46

Hardware Preparation and Installation
The blade must only be installed into hub slots of your shelf. Refer to the system's
documentation for information which slots these are in your particular configuration.
Damage of Circuits
Electrostatic discharge and incorrect blade installation and removal can damage circuits or
shorten their life.
Before touching the blade or electronic components, make sure that you are working in an
ESD-safe environment.
Damage of the blade
Incorrect installation of the blade can cause damage of the blade,
Only use handles when installing/removing the blade to avoid damage/deformation to the
face plate and/or PCB.
2.6.1 Installing the Blade
To install the blade into an AdvancedTCA shelf, proceed as follows.
46
ATCA-F120 Installation and Use (6806800D06F)