Emerson ATCA-F120 Installation And Use Manual page 11

About this Manual
Overview of Contents
This manual is divided into the following chapters and appendices.
Safety Notes on page 19
Sicherheitshinweise on page 25
notes (this had to be included for legal reasons)
Chapter 1, Introduction, on page 31
Chapter 2, Hardware Preparation and Installation, on page 37
prerequisites including the blade installation itself.
Chapter 3, Controls, LEDs and Connectors, on page 61
blade. This includes connectors and LEDs.
Chapter 4, Functional Description, on page 79
the blade. This includes a block diagram, description of the main components used and so
on.
Chapter 5, U-Boot Firmware, on page
firmware U-boot and how to work with it.
Appendix A, Related Documentation
documentation
Abbreviations
This document uses the following abbreviations:
Abbreviation
ACL
ADC
AMC
BBS
BIX
BT
CPU
ATCA-F120 Installation and Use (6806800D06F)
lists safety notes applicable to the blade
is the German translation of the previous English safety
describes the main features of the ATCA-F120.
describes in more detail functional blocks of
101describes the main features of the on-board boot
provides links to further ATCA-F120-related
Description
Access Control List
Analog-to-Digital Conversion
Advanced Mezzanine Card
Basic Blade Service
Block Transfer
Central Processing Unit
describes installation
describes external interfaces of the
11