System Setting - Emerson Liebert PEX+ Series User Manual

Power Status
The Power Status menu is as shown in Figure 1-17.You can browse the input power status of the air conditioner:
A-Phase Voltage, B-Phase Voltage, C-Phase Voltage and Power Frequency.

1.6.6 System Setting

Press Up and Down in Main Menu 1/2 to move cursor to System Setting and press Enter to enter the System
Setting. The menu is displayed in two screens, as shown in Figure 1-18.
TEMP Control
The TEMP Control menu is displayed on two screens, as shown in Figure 1-19.
Only platform engineer can access the latter seven menu items.
HUM Control
The HUM Control menu is displayed on two screens, as shown in Figure 1-20. Only platform engineer can access the
menu.
Figure 1-16 NTC interfaces
Figure 1-17 Power Status interface
Figure 1-18 System Setting interface
Figure 1-19 Temp Control interface
PACC11Z Precision Air Conditioner User Manual
Chapter 1 Precision Air Conditioner Controller 9