Introduction; Certifications And Exemptions; Ce Certification; Rohs Exemption - Holzworth Instrumentation HS9000B Series User Manual

1.0 INTRODUCTION

Thank you for purchasing a Holzworth Instrumentation Multi-Channel RF Synthesizer. The
combination of Holzworth‟s proprietary non-PLL synthesizer architecture and the multi-channel
integration provides the user with unique product performance advantages which are currently only
available from Holzworth Instrumentation Inc.
This User‟s Manual is a generic, quick reference guide for use with the Holzworth HS9000B Series
Multi-Channel RF Synthesizer products. Refer to section 5 for specific configuration details with
regards to the HS9000B Series hardware.

2.0 CERTIFICATIONS and EXEMPTIONS

2.1 CE CERTIFICATION

Holzworth multi-channel synthesizer products comply by test and design, with
the essential requirements and other relevant provisions of the EMC Directive:
2004/108/EC, and the Electrical equipment for measurement, control and
laboratory use EMC requirements (test standard): EN 61326-1: 2006; as set forth
by the Council of the European Union.

2.2 ROHS EXEMPTION

Holzworth multi-channel synthesizer products are in compliance with Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003 on the Restriction and use of Certain
Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive), with an exemption
for Lead in Electronic Ceramic Parts (e.g. Piezoelectric Devices) per the Directive‟s Annex
Paragraph 7 applied.
The HS9000B Series Multi-channel products are fully compliant in accordance to the definitions
given in the directives. The exemption is made resulting from the Maximum Concentration Value of
Lead (Pb) being less than 0.1% of the total weight of any multi-channel product offered by
Holzworth.

3.0 PRODUCT WARRANTY

Holzworth RF synthesizers come with a 2 year 100% product warranty covering manufacturing
defects. All product repairs and maintenance must be performed by Holzworth Instrumentation Inc.
Holzworth reserves the right to invalidate the warranty for any products that have been tampered
with or subjected to improper use. If the unit becomes damaged, please contact Holzworth
Instruments or your local representative for an RMA Number & instructions prior to returning the
unit for repair.

4.0 CALIBRATION NOTICE

Holzworth calibrates each channel for output frequency accuracy and output amplitude accuracy.
The factory calibration is valid for 2 years from the original calibration date. Holzworth provides
calibration services for applicable Holzworth products. Contact sales@holzworth.com with model
number and serial number for a calibration service quotation. Holzworth also makes the calibration
routine and equipment list available to customers who have the capability to perform on site
calibration. Contact support@holzworth.com for more information.
www.holzworth.com
HS9000B Series Manual 1.04 Page 3 of 65