Holzworth Instrumentation HS9000B Series User Manual page 19

8. In Properties, left-click "Internet Protocol Version 4 (TCP/IPv4)", the Properties button highlighted
below will become available. Click the button and the window on the right will open. Set to 'Obtain
an IP address automatically'.
With a direct Ethernet connection between the PC and synthesizer both will default to network
settings that will allow communication.
The synthesizer IP address will default to 169.254.117.11 and the subnet address will default to
255.255.0.0.
The PC IP address will default to 169.254.xxx.xxx and the subnet address will default to
255.255.0.0.
7. Close and re-launch the application GUI. Attempt to establish a connection to the HS9000B.
8. For further assistance please contact Holzworth Support.
www.holzworth.com
HS9000B Series Manual 1.04 Page 17 of 65