Holzworth Instrumentation HS9000B Series User Manual page 40

Most commands on the following pages are in reference to Modulation Control. Modulation
is only available on HS9000 Series synthesizers that have OPT-EXTMOD installed, which
includes channel dedicated modulation ports at the front panel. Internal pulse modulation,
pulse rep rate, and pulse width are available without OPT-EXTMOD.
:MOD?
Example TX:
RX:
:MOD:MODE:<value>
<value> OFF <or> PULSE <or> PULSE:SRC:EXT <or> PULSE:SRC:INT <or>
Example TX:
RX:
NOTE: In the value field above, PULSE or PULSE:SRC:EXT enable external pulse modulation.
:MOD:MODE?
Example TX:
RX:
HS9000B Series Manual 1.04
Modulation Enable
Query Modulation Enable Status
:CHn:MOD?
DIS <or> EXT
Set Modulation Mode
PULSE:SRC:INT:TRIGGER <or> FM <or> AM <or> PM <or>
SWEEP:FREQ <or> LOOKUP:NARROW <or> LOOKUP:WIDE
:CHn:MOD:MODE:PULSE:SRC:EXT
External Pulse Modulation Set
Query Modulation Mode Status
:CHn:MOD:MODE?
OFF <or> PULSE:EXT <or> PULSE:INT <or> PULSE:INT:TRIGGER
<or> FM <or> AM <or> PM <or> SWEEP:FREQ <or>
LOOKUP:NARROW <or> LOOKUP:WIDE
www.holzworth.com
Page 38 of 65