Holzworth Instrumentation HS9000B Series User Manual page 54

:MOD:LIST:WIDE:<point>,<freq><freq
suffix>,<power>[power suffix],[dwell time][dwell suffix]
<point>
<freq>
<freq suffix>
<power>
[power suffix] [dBm]
[dwell time]
[dwell suffix]
Example
:MOD:LIST:WIDE?<point>
<point> Point location.
Example TX:
RX:
*NOTE: If a dwell time is not specified with each point, then the value used for dwell time will be the
value set using the Set Wide Band Dwell Time command.
The list of dwell times is not saved to the device. If the synthesizer is power cycled, then the
complete list with dwell times must be reloaded.
HS9000B Series Manual 1.04
Set Wide Band List Values*
Point location.
:MOD:LIST:WIDE:PTS:
Synthesizer Dependent
GHz,MHz, kHz, Hz
Synthesizer Dependent
Synthesizer Dependent OPTIONAL
ms, [us] OPTIONAL
TX: :CHn:MOD:LIST:WIDE:1,100.1MHz,-1.0dBm,3.4ms
RX: Stored frequency, power, and dwell time for point 1 <or> Invalid
point
Query Wide Band List Value (for the given point)
Cannot be greater than the value set using
:MOD:LIST:WIDE:PTS:
:CHn:MOD:LIST:WIDE?1
1001.000 MHz,-1.00,3400 us <or> Invalid Point
www.holzworth.com
Set Wide Band List Value (for the
given point)
Cannot be greater than the value set using
Page 52 of 65