Ethernet Communication; Lan Connection; Dhcp - Holzworth Instrumentation HS9000B Series User Manual

7.2 ETHERNET COMMUNICATION

7.2.1 LAN Connection

Communication with the HS9000B over a LAN connection defaults to the use of DHCP. The
instrument can be addressed by using either the network assigned IP address or by using the
instrument serial (ex. "HS9000B-123") and the TCP port (9760). Use the Holzworth Ethernet Finder
software to locate and modify IP address settings on the instrument.
To search for devices, click the Devices button and then click Locate Devices in the sub menu.
The software will then scan for instruments connected via Ethernet and via serial port. It will display
Ethernet devices as shown below:
Identify the instrument by serial # or IP address and click to connect. If the connection is successful
the window above 'Devices' will turn green (Ethernet) and display the instrument serial number:
Users can also enter the instruments IP address manually to connect. Enter the IP address into the
'Device IP Address' field and then press the Connect button.
If the connection is successful the window above 'Devices' will turn green and display the IP
address.

7.2.2 DHCP

When the HS9000B is connected to a network with a DHCP server, the network settings will be
auto-assigned per the servers configuration.
If the HS9000B is connected directly to a PC or to a network with no DHCP server the instrument's
default IP address will be:
169.254.117.11
www.holzworth.com
HS9000B Series Manual 1.04 Page 13 of 65