Introduction; Certifications And Exemptions; Ce Certification; Rohs Compliance - Holzworth Instrumentation HSX Series User Manual

1.0 INTRODUCTION

Thank you for purchasing a Holzworth Instrumentation HSX Series Multi-Channel RF
The combination of Holzworth's proprietary multi-loop synthesizer
Synthesizer module.
architecture and the multi-channel integration provides the user with unique product
performance advantages which are currently only available from Holzworth Instrumentation Inc.
This User's Manual is a quick reference guide for use with the Holzworth HSX Series Multi-
Channel RF Synthesizer products. Refer to section 5 for specific configuration details with
regards to the HSX Series hardware.

2.0 CERTIFICATIONS and EXEMPTIONS

2.1 CE CERTIFICATION

Holzworth multi-channel synthesizer products comply by test and design, with
the essential requirements and other relevant provisions of the EMC Directive:
2004/108/EC, and the Electrical equipment for measurement, control and
laboratory use EMC requirements (test standard): EN 61326-1: 2006; as set forth
by the Council of the European Union.

2.2 RoHS COMPLIANCE

Holzworth multi-channel synthesizer products are in compliance with Directive 2002/95/EC of
the European Parliament and of the Council of 27 January 2003 on the Restriction and use of
Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS Directive).

3.0 PRODUCT WARRANTY

Holzworth HSX Series synthesizers come with a 3 year 100% product warranty covering
manufacturing defects. All product repairs and maintenance must be performed by Holzworth
Instrumentation Inc. Holzworth reserves the right to invalidate the warranty for any products
that have been tampered with or subjected to improper use. If the unit becomes damaged,
please contact Holzworth Instruments or your local representative for an RMA Number &
instructions prior to returning the unit for repair.

4.0 CALIBRATION NOTICE

Holzworth calibrates each channel for output frequency accuracy and output amplitude
accuracy. The factory calibration is valid for 2 years from the original calibration date. Holzworth
provides calibration services for applicable Holzworth products. Contact sales@holzworth.com
with model number and serial number for a calibration service quotation. Holzworth also makes
the calibration routine and equipment list available to customers who have the capability to
perform on site calibration. Contact support@holzworth.com for more information.
www.holzworth.com Page
HSX Series User Manual 1.14
4 of 32