Holzworth Instrumentation HS9000B Series User Manual page 47

:MOD:SWEEP:FREQ:START:<value><suffix>
<value> Synthesizer Dependent
<suffix> Hz, kHz, MHz, GHz
Example TX:
RX:
:MOD:SWEEP:FREQ:START?
Example TX:
RX:
* The maximum and minimum for the Sweep Start Frequency are the same as the corresponding
values for the Set Frequency. Refer to the Set Frequency page for the maximum and minimum
values.
HS9000B Series Manual 1.04
Set Frequency Sweep Start Frequency*
:CHn:MOD:SWEEP:FREQ:START:100.1MHz
Sweep Frequency Start Set
Query Synthesizer Sweep Start RF Frequency
:CHn:MOD:SWEEP:FREQ:START?
100.1 MHz
www.holzworth.com
Set Synthesizer Sweep Start RF Frequency
Page 45 of 65