Image Is Not The Correct Size; Connection Fail When Dhcp On - Christie GS Series Manual
Hide thumbs
Also See for GS Series:
- Service manual (94 pages) ,
- User manual (80 pages) ,
- Technical reference (62 pages)
Table of Contents
Advertisement
Resolution
•
If you play 4:3 format DVD titles, change the format to 4:3 in the projector on-screen display.
•
If the image is still stretched, adjust the aspect ratio by setting the display format as 16:9
(wide) aspect ratio type on your DVD player. For more details, see
Image is not the correct size
The image is too small or too large.
Resolution
•
Adjust the lens zoom to fit.
•
Verify you are using the correct lens.
•
Change the position of the projector.
Connection fail when DHCP on
IP address shows 0.0.0.0 when DHCP is on.
Resolution
•
Make sure RJ45 cable is connected correctly and securely to the projector and the network
device.
•
Check if there is a DHCP server in this network.
•
After checking the steps above, refresh the network setting by turning DHCP off and turning
back on.
•
Contact your IT engineer if the steps above cannot resolve the network issue.
• Turning off DHCP returns back to default setting if DHCP on fails.
DWU6322-GS/DWU7062-GS User Manual
020-001792-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Troubleshooting
Screen menu
on page 38.
62
Advertisement
Table of Contents
