Led Status Indicators; Light Led; Status Led; Picture Mute Led - Christie GS Series Manual

LED status indicators

LEDs are defined below.

Light LED

Identify the laser diode state colors and meaning.
LED status
Red (flashing)
Orange (solid)
Green (solid)
Off

Status LED

Identify the LED state colors and meaning.
LED status
Off
Off, but keypad LED is on
Green (solid)
Green (flashing)
Orange (flashing)
Green (flashing) / Orange
(solid)
Red (solid)
Red (flashing)

Picture Mute LED

Identify the picture mute LED state colors and meaning.
LED status Projector state
Green (solid) Light is on and an image is displayed.
Orange (solid) Light is on and the image is blank.
DWU6322-GS/DWU7062-GS User Manual
020-001792-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Projector state
Projector has lost over 60% initial luminance.
Laser diode time has expired.
Laser diode is on and operating correctly.
Laser diode is off.
Projector state
AC power is off (without AC plugged in).
AC has been applied, projector is in standby mode.
NOTE: Status LED cannot be flashing red, as this is reserved for an error condition.
Status LED is off but keypad LED will indicate Standby Mode.
Projector is powered up and operating normally.
Projector communications.
Projector is in cool down mode or startup mode.
Projector is in flash update state.
Over-temperature.
Fan failure.
Introduction
18